Black Friday sale
PTCB Quiz Prep

Reconstitution Calculator

Updated

Enter the drug in the vial, the diluent and the powder volume to get the concentration. The calculator also works out how much diluent to add for a set concentration, or the powder volume from a label, and the millilitres to draw for a dose. It counts the powder in the final volume, which most reconstitution calculators leave out, and it takes mg, g, mcg or units and concentrations per 1 mL or per 5 mL. For the dose-to-volume method behind the last step, read Clinical Dosing Calculations: IV Flow Rates, Weight-Based Dosing and BSA.

Answer

250 mg/mL

Final volume 4 mL at 250 mg/mL. Draw 2 mL for the dose.

  1. Step 1. Final volume = diluent + powder volume = 3.6 mL + 0.4 mL = 4 mL.
  2. Step 2. Concentration = drug ÷ final volume = 1,000 mg ÷ 4 mL = 250 mg/mL.
  3. Step 3. Set up the proportion: 250 mg / 1 mL = 500 mg / x mL, so x = 500 ÷ 250 = 2 mL.
  4. Check. 1,000 mg ÷ 4 mL = 250 mg/mL, and 2 mL × 250 mg/mL = 500 mg.

The final volume is the diluent plus the powder. Using the diluent alone as the final volume gives too high a concentration.

For exam practice and learning only, not for clinical use. Reconstitute real vials with the diluent and volume on the product label.

How the reconstitution calculator works

The final volume is the diluent you add plus the space the powder takes up once it dissolves. The concentration is the drug divided by that final volume, and the volume to draw is the dose divided by the concentration.

final volume = diluent added + powder volume

concentration = drug ÷ final volume

volume to draw = dose ÷ concentration

If you leave the powder volume blank, the calculator takes it as 0 mL and says so. That matches problems that give no powder volume, but a real vial almost always adds some.

Example: a 1 g ceftriaxone vial for a 500 mg dose

The Hospira label adds 3.6 mL of diluent to the 1 g vial for IM use and gives about 250 mg/mL, so the powder adds 0.4 mL. With 1,000 mg, 3.6 mL and 0.4 mL entered, the final volume is 3.6 + 0.4 = 4 mL and the concentration is 1,000 ÷ 4 = 250 mg/mL. For a 500 mg dose, 250 mg / 1 mL = 500 mg / x mL, so x = 2 mL. Using the 3.6 mL of diluent as the final volume would give about 278 mg/mL and a 1.8 mL dose, which is short.

Finding the powder volume from a label

Switch to "Find the powder volume" and enter the drug, the diluent the label tells you to add and the concentration it gives. The azithromycin label adds 15 mL of water to the 1,200 mg bottle to make 200 mg/5 mL. That is 40 mg/mL, so the final volume is 1,200 ÷ 40 = 30 mL and the powder takes up 30 - 15 = 15 mL. Choose "5 mL" under "Concentration is per" for oral suspension labels like this one.

Finding how much diluent to add

Switch to "Find the diluent to add" when the question gives the concentration it wants. The calculator divides the drug by that concentration to get the final volume, then takes off the powder volume. A 5,000,000 unit vial of penicillin G with a 1.8 mL powder volume makes 250,000 units/mL in 20 mL, so you add 18.2 mL. That is the volume the Pfizerpen label lists for that strength.

When not to use it

  • You are diluting a liquid that is already made. Use C1 × V1 = C2 × V2, covered in the alligation guide.
  • The dose is ordered in mg/kg or mg/m². Work out the dose first with the clinical dosing calculations, then enter it here.
  • You need more than one vial. The calculator stops when the dose is more than one vial holds.

Every result has a "Copy link to this problem" button, so you can send a worked problem to a classmate or save it to check later.

Frequently asked questions

What is powder volume?

Powder volume is the space the dry drug takes up once it dissolves. It is the final volume minus the diluent added. An azithromycin 1,200 mg bottle takes 15 mL of water and makes 30 mL of suspension, so the powder adds 15 mL.

Why is the final volume more than the diluent I added?

Because the powder adds volume. A 1 g ceftriaxone vial with 3.6 mL of diluent makes about 4 mL at 250 mg/mL. Dividing 1,000 mg by 3.6 mL instead gives about 278 mg/mL, and every dose drawn from that number is wrong.

How much diluent do I add to get a set concentration?

Divide the drug by the concentration you want to get the final volume, then subtract the powder volume. For 5,000,000 units of penicillin G at 250,000 units/mL, the final volume is 20 mL, and with a 1.8 mL powder volume you add 18.2 mL.

How do I work out how many mL to draw for a dose?

Divide the dose by the concentration, or set up a proportion: 250 mg / 1 mL = 500 mg / x mL, so x = 2 mL. Enter the dose in the calculator and it adds this step to the answer.

Is reconstitution the same as dilution?

No. Reconstitution adds a diluent to a dry powder to make a liquid. Dilution adds a diluent to a liquid that is already made and uses C1 × V1 = C2 × V2.

Practice reconstitution without the calculator

On the exam you work these by hand, so use the calculator to check your answers, not to replace the method. Work the problems on the PTCB math practice test, then check any you missed here.

The rest of the pharmacy math series

The other pages in the series use the same method, so once one clicks the others read faster. The full set sits on the pharmacy math guide.

PTCB Quiz Prep is an independent study resource, not affiliated with PTCB. This calculator is for exam practice and learning, not for clinical use.