Black Friday sale
PTCB Quiz Prep

Pharmacy Billing and Insurance Practice Questions

Updated · aligned to the 2026 PTCE outline

Third-party claims, DAW codes, rejection handling and the fields that make an adjudication go through.

26 questions20 answered belowEvery answer citedFree practice quiz

Key takeaways

  • DAW 0 is no product selection indicated, the default for most generic fills.
  • DAW 1 is prescriber requests brand. DAW 2 is patient requests brand.
  • BIN and PCN route the claim to the correct processor. A wrong BIN rejects the claim outright.
  • Prior authorization is a payer decision, not a pharmacy one. The prescriber initiates it.

Third-party billing is not on the 2026 PTCE content outline, so these questions are left out of our mock exams and domain quizzes. They are here because processing insurance claims is part of the job, and new technicians usually learn it on the floor rather than in a book.

A claim that rejects is a patient standing at the counter, and knowing which rejection means what turns a ten-minute problem into a one-minute one. DAW codes are the piece to learn first: there are ten of them, 0 through 9.

Want the same material as a timed, randomized run instead? Try the timed Order Entry quiz and the Order Entry & Processing domain guide.

Practise all 26 billing & insurance questions

A fresh 20 every time, drawn from the full set, with every answer explained at the end.

Ready when you are

20 questions · 30 minutes · randomized every attempt, with a cited explanation for every answer.

  • Give yourself 30 focused minutes. The timer won't pause once you begin.
  • Silence your phone and close other tabs so nothing breaks your concentration.
  • Answer from memory. That's how you find the domains that need more review.

20 sample billing & insurance questions and answers

20 of the 26 questions the practice quiz above draws from. Each answer is followed by an explanation and a link to the primary source it was checked against.

  1. 1. What is the primary function of the BIN on a patient's prescription insurance card?

    • A.It identifies the patient's copay tier within the plan
    • B.It is a six-digit number that routes the electronic claim to the correct claims processor
    • C.It verifies that the prescriber is enrolled with the plan
    • D.It records which pharmacy dispensed the prescription

    Answer: B. It is a six-digit number that routes the electronic claim to the correct claims processor

    The BIN (Bank Identification Number, field 101-A1) is a six-digit number required on every electronic pharmacy claim; the industry uses it to route the transaction to the correct payer or processor. It works together with the PCN, group number, and cardholder ID, which are collectively known as the 4Rx data.

    Source: ncpdp.org

  2. 2. A patient's insurance card lists RxBIN, RxPCN, RxGRP, and a member ID. What role does the PCN play when the claim is transmitted?

    • A.It sets the maximum days supply the plan will pay for
    • B.It identifies the patient's relationship to the cardholder
    • C.It replaces the BIN when the plan is government funded
    • D.It acts as a secondary routing identifier that directs the claim to the correct benefit within the processor

    Answer: D. It acts as a secondary routing identifier that directs the claim to the correct benefit within the processor

    The Processor Control Number (PCN) is used together with the BIN as part of the 4Rx data to fine-tune claim routing, pointing the transaction to the specific plan or benefit configuration inside a processor. Relationship to the cardholder is conveyed by the person code and relationship fields, not the PCN.

    Source: cms.gov

  3. 3. A claim transmitted for a maintenance medication returns NCPDP reject code 79. What is the plan communicating?

    • A.The prescriber is not covered by the plan
    • B.The drug requires step therapy before coverage
    • C.The refill is being requested too soon after the previous fill
    • D.The cardholder ID was entered incorrectly

    Answer: C. The refill is being requested too soon after the previous fill

    Reject code 79 is Refill-Too-Soon, meaning the plan's records show the patient should still have medication remaining from the last fill. Most plans allow the refill to process once roughly 75-80% of the previous days supply has elapsed.

    Source: primewest.org

  4. 4. A new prescription claim rejects with NCPDP code 75, "Prior Authorization Required." What is the most appropriate next step for the pharmacy team?

    • A.Notify the prescriber's office so a prior authorization request can be initiated with the plan
    • B.Resubmit the same claim until it pays
    • C.Change the days supply to a smaller value and resubmit
    • D.Dispense the medication and bill the plan later

    Answer: A. Notify the prescriber's office so a prior authorization request can be initiated with the plan

    Reject 75 means the plan will not pay until the prescriber obtains prior authorization, so the prescriber's office must submit clinical justification to the insurer. Resubmitting unchanged claims or altering the days supply does not resolve a PA requirement, and dispensing without an approved claim risks nonpayment unless the patient chooses to pay cash.

    Source: primewest.org

  5. 5. While billing a new patient's first prescription, the claim rejects as "M/I Cardholder ID Number." What should the technician do first?

    • A.Ask the pharmacist to override the rejection
    • B.Bill the prescription to the pharmacy's house account
    • C.Compare the ID number entered in the system with the number printed on the insurance card and resubmit
    • D.Tell the patient the plan has terminated coverage

    Answer: C. Compare the ID number entered in the system with the number printed on the insurance card and resubmit

    M/I stands for missing/invalid, so reject 07 usually signals a typo or omission in the cardholder ID field. The technician should verify every character against the physical or electronic card, correct the entry, and retransmit before assuming there is a true eligibility problem.

    Source: primewest.org

  6. 6. A Medicaid claim returns NCPDP reject code 41, "Submit bill to other processor or primary payer." What does this rejection indicate about the patient's coverage?

    • A.The patient has no active prescription coverage of any kind
    • B.The patient has another insurance plan that must be billed first, with Medicaid as a later payer
    • C.The pharmacy's NCPDP number is not on file with the state
    • D.The prescription is too old to be billed to any plan

    Answer: B. The patient has another insurance plan that must be billed first, with Medicaid as a later payer

    Reject 41 signals a coordination of benefits issue: the plan's records show other primary coverage, so the claim must be billed to that primary payer first. Medicaid is the payer of last resort, and the technician should collect the primary plan's billing information and rebill in the correct order.

    Source: primewest.org

  7. 7. A claim for a covered dependent child rejects with "M/I Person Code." What does the person code identify on a pharmacy claim?

    • A.The specific individual, such as cardholder, spouse, or dependent, covered under the cardholder's plan
    • B.The prescriber's license classification
    • C.The pharmacy employee who entered the claim
    • D.The therapeutic category of the billed drug

    Answer: A. The specific individual, such as cardholder, spouse, or dependent, covered under the cardholder's plan

    The person code distinguishes each covered family member under the same cardholder ID, commonly 01 for the cardholder, 02 for a spouse, and higher numbers for dependents. Submitting the wrong person code makes the plan unable to match the claim to the correct member, which triggers reject 08.

    Source: primewest.org

  8. 8. A Medicare Part D claim is submitted without the prescriber's National Provider Identifier. Under 42 CFR 423.120, what must the Part D sponsor do?

    • A.Pay the claim and request the NPI later
    • B.Reject the claim unless it contains the active and valid NPI of the prescriber
    • C.Substitute the pharmacy's NPI and pay the claim
    • D.Pay the claim only if it is for a generic drug

    Answer: B. Reject the claim unless it contains the active and valid NPI of the prescriber

    42 CFR 423.120(c)(5) requires a Part D sponsor (or its PBM) to reject a pharmacy claim for a Part D drug unless the claim contains the active and valid NPI of the prescriber who prescribed the drug. The pharmacy's own NPI cannot stand in for the prescriber, and the rule does not depend on generic or brand status.

    Source: law.cornell.edu

  9. 9. A prescriber requests a standard (not expedited) Part D coverage determination for a drug benefit. Under 42 CFR 423.568, what is the latest the plan may notify the enrollee of its decision after receiving the request?

    • A.24 hours
    • B.7 calendar days
    • C.72 hours
    • D.14 calendar days

    Answer: C. 72 hours

    42 CFR 423.568(b) requires the plan to notify the enrollee of a standard drug benefit determination as quickly as the enrollee's health requires, but no later than 72 hours after receipt of the request. Twenty-four hours is the expedited timeframe, and 14 calendar days applies to requests for payment.

    Source: law.cornell.edu

  10. 10. A Part D plan approves a prescriber's request for an expedited coverage determination. Under 42 CFR 423.572, what is the latest the plan may notify the enrollee of its decision?

    • A.14 calendar days after receiving the request
    • B.72 hours after receiving the request
    • C.3 business days after receiving the request
    • D.24 hours after receiving the request

    Answer: D. 24 hours after receiving the request

    42 CFR 423.572(a) requires a plan that approves an expedited request to decide and notify the enrollee no later than 24 hours after receiving the request. Seventy-two hours is the standard timeframe, and 14 calendar days applies to payment requests.

    Source: law.cornell.edu

  11. 11. A claim for atorvastatin 40 mg tablets, quantity 30, with the sig "i tab PO qd" rejects for a high-dose DUR alert. The technician sees the days supply was keyed as 10 instead of 30. Using the Medicaid DUR definition of dosage, what daily dose did the claim appear to show?

    • A.40 mg per day
    • B.120 mg per day
    • C.80 mg per day
    • D.400 mg per day

    Answer: B. 120 mg per day

    42 CFR 456.705(b)(4) defines dosage as strength multiplied by quantity dispensed divided by days supply: 40 mg x 30 / 10 = 120 mg per day, three times the prescribed 40 mg per day (40 mg x 30 / 30). Correcting the days supply to 30 should clear the false high-dose alert.

    Source: law.cornell.edu

  12. 12. A long-term care pharmacy is filling a brand-name tablet for a Medicare Part D resident of a nursing facility. Under 42 CFR 423.154, what is the largest supply it may dispense at one time?

    • A.7 days
    • B.30 days
    • C.14 days
    • D.90 days

    Answer: C. 14 days

    42 CFR 423.154(a)(1)(i) requires pharmacies serving long-term care facilities to dispense solid oral doses of brand-name drugs in no greater than 14-day increments at a time. Thirty- and 90-day supplies exceed the limit, and 7 days is not the regulatory maximum.

    Source: law.cornell.edu

  13. 13. Which brand-name solid oral product does 42 CFR 423.154 exclude from the Part D 14-day long-term care dispensing requirement?

    • A.A brand-name statin
    • B.A brand-name antihypertensive
    • C.A brand-name antidepressant
    • D.An oral contraceptive customarily dispensed in its original packaging

    Answer: D. An oral contraceptive customarily dispensed in its original packaging

    42 CFR 423.154(b) excludes solid oral antibiotics and solid oral doses dispensed in their original container or customarily dispensed in original packaging to aid compliance, giving oral contraceptives as the example. Statins, antihypertensives, and antidepressants have no such exclusion.

    Source: law.cornell.edu

  14. 14. A Medicaid claim rejects because the drug's labeler does not take part in a federal program. Under Section 1927 of the Social Security Act, which program must a manufacturer participate in for its drugs to be paid by Medicaid?

    • A.The Medicaid Drug Rebate Program
    • B.The 340B Drug Pricing Program
    • C.The Medicare Part D coverage gap program
    • D.The FDA Orange Book program

    Answer: A. The Medicaid Drug Rebate Program

    Section 1927 of the Social Security Act permits only drugs from manufacturers (or labelers) that participate in the Medicaid Drug Rebate Program to be paid for by Medicaid. 340B is a separate discount program, and the Orange Book lists therapeutic equivalence ratings, not payment eligibility.

    Source: keystonefirstpa.com

  15. 15. A prescriber allows generic substitution for atorvastatin, but the patient insists on receiving brand-name Lipitor. Which DAW code should the technician submit?

    • A.DAW 1
    • B.DAW 7
    • C.DAW 0
    • D.DAW 2

    Answer: D. DAW 2

    DAW 2 means substitution was allowed but the patient requested that the brand product be dispensed. Plans often apply a higher copay or charge the patient the cost difference in this situation, so coding it accurately matters for correct billing.

    Source: resdac.org

  16. 16. A pharmacy has temporarily run out of the generic version of a drug, so the pharmacist dispenses the brand product even though substitution was permitted. Which DAW code reflects this situation?

    • A.DAW 8
    • B.DAW 4
    • C.DAW 3
    • D.DAW 2

    Answer: B. DAW 4

    DAW 4 indicates substitution was allowed but the generic drug was not in stock at the pharmacy. DAW 8 is different: it applies when the generic is not available in the marketplace at all, not just out of stock locally.

    Source: ilyouthcare.com

  17. 17. Which situation is correctly billed with DAW 0?

    • A.The prescriber requires the brand product to be dispensed
    • B.State law mandates that the brand product be dispensed
    • C.No product selection instruction was given and the generic is dispensed
    • D.The patient asks the pharmacy to order the brand product

    Answer: C. No product selection instruction was given and the generic is dispensed

    DAW 0 means no product selection was indicated, which is the default code used when substitution is permitted and the pharmacy dispenses the generic (or the only available product). Prescriber-required brand is DAW 1, a legal mandate is DAW 7, and a patient request for brand is DAW 2.

    Source: resdac.org

  18. 18. A prescriber permits generic substitution, and the pharmacy dispenses the brand product as its generic entity (for example, because the brand is what the pharmacy uses in place of a generic). Which DAW code describes this?

    • A.DAW 5
    • B.DAW 2
    • C.DAW 1
    • D.DAW 7

    Answer: A. DAW 5

    The CMS Part D event file defines DAW 5 as "Substitution Allowed - Brand Drug Dispensed as Generic." DAW 1 means the prescriber did not allow substitution, DAW 2 means the patient requested the brand, and DAW 7 means the brand is mandated by law.

    Source: resdac.org

  19. 19. A prescription allows substitution, but no generic version of the drug is currently being marketed, so the brand is dispensed. Which DAW code applies?

    • A.DAW 4
    • B.DAW 8
    • C.DAW 0
    • D.DAW 3

    Answer: B. DAW 8

    The CMS Part D event file defines DAW 8 as "Substitution Allowed - Generic Drug Not Available in Marketplace." DAW 4 is used when a generic exists but the pharmacy has none in stock, DAW 0 means no product selection is indicated, and DAW 3 means the pharmacist selected the product.

    Source: resdac.org

  20. 20. A prescriber allows substitution, and the pharmacist chooses to dispense the brand product rather than a generic. Which DAW code describes a pharmacist-selected product when substitution was allowed?

    • A.DAW 2
    • B.DAW 6
    • C.DAW 3
    • D.DAW 9

    Answer: C. DAW 3

    The CMS Part D event file defines DAW 3 as "Substitution Allowed - Pharmacist Selected Product Dispensed." DAW 2 is a patient request for brand, DAW 6 is an override, and DAW 9 is listed as "Other."

    Source: resdac.org

Billing & Insurance: FAQ

Is pharmacy billing on the PTCB exam?

Not on the current one. The PTCE content outline effective January 6, 2026 has four domains (Medications, Federal Requirements, Patient Safety and Quality Assurance, Order Entry and Processing) and lists no billing or insurance knowledge area. That is why our mock exams leave these questions out.

What are DAW codes?

Dispense As Written codes, numbered 0 through 9, that tell the payer why a brand or generic was dispensed. DAW 0 means no selection was indicated, DAW 1 means the prescriber required the brand, and DAW 2 means the patient requested it. The code affects reimbursement and patient copay.

What do BIN and PCN mean on an insurance card?

BIN is the Bank Identification Number, a six-digit code that routes the claim to the correct processor. PCN is the Processor Control Number, which the processor uses to direct the claim to the right plan within its system. Both must be entered correctly or the claim rejects.

Can a pharmacy technician start a prior authorization?

A technician can identify that a prior authorization is required and initiate the paperwork or electronic request, but the prescriber has to supply the clinical justification and the payer makes the decision. The pharmacy cannot approve one.

Official sources checked

Every answer above links to the source it was checked against. These are the 12 sources behind this set.

More practice question sets

All of these sets sit under our PTCB practice questions with answers hub, which lists every set with its question count. Prefer a timed run instead? Browse every free PTCB quiz by domain.

PTCB Quiz Prep is an independent study resource and is not affiliated with the Pharmacy Technician Certification Board.